Harley-Davidson's Softail series hides more than just its suspension, the engine's oil drain plug can be just as hard to find.
Harley-Davidson's Softail motorcycles evoke the image of the rigid-framed motorcycles of yesteryear, but provide the comfort and performance of a modern suspension through the use of hidden shock absorbers. The 1999 Softail series uses the same Twin-Cam 88 motor used in recent models, lubricated by three separate fluids for the engine, transmission, and primary. However, many riders are uncertain of to change the motorcycle's engine oil, due mostly to the apparent absence of an oil drain plug. Once the drain plug is located, changing the oil can be done quickly and easily.
Instructions
1. Level your bike. Locate the drain plug by following the oil line from the right side of the oil tank to the frame. The oil line is plugged by the drain plug on the underside of the frame between rear shocks. Place an oil drain pan directly beneath the drain plug and remove it with a socket wrench. Pull the dipstick to allow the oil to drain more quickly. Allow the oil to drain completely.
2. Remove the old o-ring from the drain plug and slip a new o-ring over the plug. Reinstall the drain plug--do not over-tighten--and wipe away any remaining oil from the area around drain plug with a shop towel.
3. Place the drain pan under the filter. Using the oil-filter wrench, remove and discard the old oil filter. Fill the new oil filter with oil and loosely screw it onto the motor by hand.
4. Remove the oil tank filler cap and add up to three quarts of oil into the tank. Replace the filler cap and wipe way any oil spills with a shop towel.
5. Start the motor and loosen the oil filter until a thin bead of oil begins to seep out from between the motor and the filter. Tighten the filter by hand and stop the motor. Wipe away any oil spills with a shop towel.
Tags: drain plug, shop towel, with shop, with shop towel, Harley-Davidson Softail, Place drain