tub/shower diverter valve problem
After new fixtures were installed for a tub and shower, the wall-mounted diverter valve only diverted half the water to the showerhead. After several days it suddenly turned into no more than a trickle from the showerhead. The old fixtures had worked perfectly, but were replaced to modernize the bathrooms appearance. Plumbers attached the new fixtures to the old copper pipes and there are no leaks. I am sure the diverter valve was not installed too tightly and the washers, etc., appear in perfect shape as they should be since they are all new. What could the problem be and how can I fix it myself? Thanks! Have you tried removing the showerhead? It may be full of debris that travelled thru the valves and pipes after they were reassembled and worked on.
Related Posts:
Symmons temptrol shower valve problem
Symmons temptrol shower valve problem?Hi, I have a Symmons Temptrol model A shower valve in my shower.Iam not getting good hot water.There is very hot water throughout the rest of the house includ...
Well pump problem foot valve or blader tank
Well pump problem... foot valve or blader tank?I've been reading old posts here for the last couple of weeks, and I think you all ahve helped me solve my problem. Before I go spend a couple hundre...
Taco zone valve problem
Taco Zone Valve ProblemI have a 3 wire Taco zone valve and I'm not getting heat on that zone. The t stat is a new Honeywell type that looks like the old round ones but has no mercury switch in it....
Water splits half showerhalf spout
Water splits half shower/half spoutI new so be patient. Last weekend I replaced, with new both hot/cold water valves and the show diverter in my tub. Water works great but now the shower splits th...
Weilmclain indirect water heater safety valve
Weil-McLain indirect water heater safety valveWe have a Weil-McLain indirect water heater which takes the hot water from our boiler at 180 degrees and circulates it around a tank with the domestic...
