Comfortable seats are important on long rides.
Mustang seats are made of heavy-duty material that is supposed to provide comfort and durability while you are out on the road. You can purchase these seats to replace the stock seats that came equipped on the Harley Davidson Road King. You may want to dismount the Mustang seat for any number of reasons. The installing and removing procedure for these seats should only take you an hour or less.
Instructions
1. Find the washers and nuts that connect the seat and the fender bracket. Remove these with a socket wrench. Put these in a safe place, such as your pocket, since you may need them to put the seat back on the bike.
2. Remove the screw that holds the chrome rear fender bracket to the Road King fender. Put this screw in your pocket as well.
3. Grab the sides of the seat. Slide it towards the back of the bike and at the same time lift up, releasing it from the nose clip tab that it was locked into on the Road King frame. Put the seat to the side.
4. Remove the stock solo bolts that hold the seat bracket in place on the fender. Put these in your pocket. You have successfully dismounted the Mustang seat from your Road King motorcycle.
Tags: Road King, your pocket, back bike, fender bracket, Mustang seat, these seats
