A custom derby cover, such as this skull motif, can set your bike apart.
On a Harley-Davidson motorcycle, everything from the handlebars to the derby---or clutch inspection---cover can be replaced with a custom piece to reflect its owner's personality. In fact, a wide selection of derby cover are available with nearly any design imaginable, all of which can be bolted on in minutes. Exchanging your boring stock derby cover with a custom cover can add that final touch to your customized Harley-Davidson.
Instructions
1. Clear away any dirt trapped around the edge of the derby cover, using an air compressor.
2. Unscrew the six Torx-head bolts from the perimeter of the derby cover, using a T-27 screwdriver.
3. Pull the derby cover and its gasket off of the motorcycle's primary cover.
4. Place a new derby cover gasket onto the primary cover and mount the new derby cover over it.
5. Screw the derby cover bolts loosely into place, using a T-27 screwdriver.
6. Tighten the derby cover bolts completely, starting at the top bolt and working across in a zig-zag pattern, using a T-27 screwdriver.
Tags: derby cover, derby cover, T-27 screwdriver, using T-27, using T-27 screwdriver, cover bolts