Wednesday, June 27, 2012

The Specifications & Fork Size For A 2007 Harleydavidson Street Bob

Harley-Davidson has been producing motorcycles since 1903.


The Harley-Davidson Street Bob is a "bobber"--a type of motorcycle that typically has no front fender, a shortened or "bobbed" rear fender, and no superfluous parts or luxury equipment. This makes the bike lighter so that it can move faster and maneuver more tightly. The Street Bob is part of the Dyna family of Harley-Davidson motorcycles. It was released in 2006.


Engine


The 2007 Street Bob saw the introduction of a larger, 96-cubic-inch V-Twin four-stroke engine, up from 88 cubic inches in 2006. This motor provides 124.75 Nm of torque, or 92 ft.-lbs., at 3000 RPM. With a bore of 3.8 inches and a stroke of 4.4 inches, its compression ratio is 9:2:1. An ESPFI, or electronic sequential port fuel injection, and an air cooling system contributes to this motor's power. It sports a six-speed transmission, a multi-plate clutch with a diaphragm spring in an oil bath, and a chrome exhaust system. Its fuel consumption averages 53.1 mpg, and it emits an average of 102.8 grams of carbon dioxide per kilometer.


Tires, Brakes and Fork Angle


A motorcycle's fork connects the bike's front wheel and axis with the frame. The 2007 Street Bob's fork angle is 29 degrees. This motorcycle uses single disc brakes in both front and back. Its front tire is a 100/90-H19, and its rear tire is a 160/70-B17.


Dimensions


Weighing 667 lbs. with all equipment, oil and fuel, the 2007 Street Bob measures 92.8 inches long and clears the ground by 5.6 inches. Its wheelbase is 64.2 inches long, and its seat rests 26.8 inches from the ground at the lowest setting. Its fuel tank holds 4.8 gallons.







Tags: 2007 Street, inches long